Xiaoqiao Interactive Masturbation Cup

Vibration that responds to sound

Ten vibration settings offer a broad range to work through, from a gentle ripple to a firm pulse. Switch on the interactive mode and the motor follows the rhythm of the audio you play, so the cup rises and falls with the beat or the voice rather than running on a fixed pattern. The smart chip reads the sound signal and turns it into motion, which is what sets this model apart from a standard setting-based toy.

Realistic TPE sleeve

High-quality TPE lines the inside, a soft material that mimics skin closely. Realistic labia texturing at the opening and a simulation-flesh finish add to the sensation as you move inside. The outer body uses an ABS shell, which gives the sleeve a firm, stable casing and a clean white finish that is easy to wipe down.

Sized for one hand

At 22 cm long and 7.5 cm in diameter, the cup clears the shaft comfortably while the body stays compact enough to grip with one hand. It weighs 386 g, enough to feel substantial but not so much that your wrist tires during a session. The closed-end shape keeps the sleeve supported, and the whole unit is light enough to store in a drawer or bag.

Simple two-button control

Two buttons sit on the body: one cycles power and the vibration switch, the other toggles interactive mode. There are no complex menus to navigate. That makes the toy approachable if you are new to motorised masturbators, since you can move between settings and back without looking at the device or fumbling with a remote.

Quiet and private

The motor runs quietly, so you get the full sensation without a loud mechanical buzz. Pair the cup with a pair of earphones and the audio stays between you and the device, which is useful when you share a home or want to keep a session to yourself. Plug in, adjust the volume, and the interactive mode matches the sound you choose.

Charging and care

The cup recharges through a DC charging interface. Charge it fully before a session and disconnect it before cleaning. To clean, remove the inner sleeve, rinse it with warm water and mild soap, and let it air dry completely before inserting it back into the shell. Apply water-based lubricant before use; avoid silicone-based or oil-based options, which can affect the TPE.