Dual-Head Wand Vibrator

Two heads in one wand

This wand vibrator has a motor in each end, so one toy covers both the broad, rumbly pressure across a whole area and the closer contact you would normally use a bullet for. You can run either head alone or both together. For couples the split is the point: one head can stay where it works while the other moves, with no pause to swap toys. Changing ends is a turn of the wrist, not a trip to the drawer.

Ten speeds, one button away

Ten vibration speeds sit behind a two-button layout, and the second button is the interesting one. Instead of clicking up through every level to reach the top, boost takes the motor there in a single press, which suits a session that changes pace rather than one that settles on a setting and stays put. Speed and boost stay separate, so the level you chose is still there to come back to.

Heat in the tail head

The tail head heats up, which takes the first cold shock of silicone out of a session. A warm surface lets you start at the intensity you wanted instead of easing in while your body catches up. Heating runs for around an hour per charge, long enough for a full session with room to spare rather than a short burst at the start. If warmth is not the mood, leave it off and use both heads cold.

Silicone over a firm core

The heads are silicone laid over an ABS shell, so the surface stays soft while the ABS behind it holds its shape under pressure. At 20.6cm the wand reaches without your wrist taking the strain, and the 4.3cm diameter is the familiar size for anyone moving up from a bullet. Net weight is 178.94g, light enough to keep in one hand through a long session, heavy enough that it does not skate across the skin.

USB charging, no dock

A 3.7V lithium cell runs the motors, charged through a standard USB cable rather than a proprietary dock. A full charge takes two hours and returns roughly three hours of vibration on either head, so topping up between sessions is a routine rather than an event. For travel the difference matters: one cable covers the toy and your phone, and there is no wall adapter to lose or voltage question to work out.

What is in the box

Retail packaging is a plain white box with a blister tray and a shrink wrap seal, holding the wand, a USB charging cable and a user manual. The box measures 26cm × 7.6cm × 4.4cm, small enough for a drawer or the corner of a suitcase. Keep the tray: it holds the wand clear of everything else and stops the heads picking up fluff between uses.